I have my own Audie Technology Cam Pro Plus measurement system. Cam Pro Plus is a software and sensor package for measuring and analyzing lifter and valve motion profiles. The rotary sensor measures to 1/10 degree. The linear sensor can resolve 1 micron (0.00004 inches). If you want to accurately compare different cam profiles, you need far more information than the maufacturers provide. Duration and total lift numbers from a catalogue or cam card do not tell you the whole story. Running a test on your cam with Cam Pro Plus allows you to compare cams on the basis of their total profiles.
- Check cams before you install them to verify that they match the cam card
- Verify your cam matches the information on the cam card
- Precise lobe centre angle to 1/10°
- Analyze ‘mystery’ cams with missing manufacturer part numbers
- Compare cams on the basis of their total profiles
- Study your camshafts to learn what makes a good cam for your engines
This a serious piece of kit!
Fully detailed cam analysis report (all four lobes): £30 + vat
Discount for multiple tests (more than one cam)
Call or email for more info
As used by:
- Crane Cams
- Crower Cams
- Kent Cams
- Lunati Cams
- Schneider Racing Cams
- Web Cam
- AJ Foyt Racing
- Chip Ganassi Racing
- Cosworth Racing
- Honda Performance Development
- John Force Racing
- JP Motorsports
- Lotus Cars
- MAHLE Clevite
- Porsche Motorsports
- Reher & Morrison
- Rousch Technologies
- Toyota Motor Sport Division